Trane Thermo King T-590 Series Installation Manual page 36

Securing Evaporator Drain Hoses
N N o o t t e e : : Evaporator drain hoses must be installed without any sharp bends or kinks to allow for proper water drainage.
1. Route drain hoses from under unit and down the front wall of the truck box.
2. Secure hoses with supplied self tapping screws and clamps.
3. Cut off excess hose and install a check valve securely onto each hose with tie bands.
Figure 24. Evaporator Drain Hose Shown Properly Secured
1
2
3
RCS1091-2
TK 56700-1-IM-EN
36