Advertisement
Step 1: Set up the Cable Modem
A
Find your Cable Internet Account Number and login information (your
email address or username, password) and have it ready for Step 3.
Login Username:
Login Password:
B
If you are replacing a Cable Modem that is currently connected in
your home, unplug the old modem and remove it from its current
location. Place this new Cable Modem in the same spot as the
previous modem. Otherwise, place the Cable Modem near a
Coax and Power Outlet.
C
Connect a coaxial cable (usually provided by your cable company)
from the Cable Modem to a Coax Outlet on the wall. Make sure
that the cable is tightly connected. (If you need a coaxial cable,
one has been provided in the box.)
NOTE: If Comcast XFINITY is your cable Internet provider, Comcast
XFINITY recommends connecting your cable modem directly
to a Coax wall outlet, rather than connecting it to a splitter.
D
Connect the Power Adapter (12V, 2A) to the Cable Modem and
then plug it into a Power Outlet.
Wait until the four LEDs on the right are SOLID
E
This may take up to 2-3 minutes.
If not, please check the Cable connection. If you believe that the
coax cables are tightly connected then please call your Cable
Internet Service Provider. It is possible that your Cable service has
not been activated.
Quick Install Guide - CODA Cable Modem
GREEN
or BLUE.
1
Advertisement
