Viessmann Vitocell 140-E Installation And Service Instructions For Contractors page 14

Installation sequence
Vitocell without fitted Solar-Divicon
1.
Fig.9
Type plate (self-adhesive)
A
1. Fit the front section of the Vitotrans thermal insula-
tion.
2. Push the cylinder thermal insulation towards the
front by patting it. This reduces the gap between
the Vitotrans and the cylinder.
14
(cont.)
4.
3.
A
2.
3. Fit the rear strip to the thermal insulation.
4. Affix the type plate.