Intended Use; Technical Description; Information On The Electrical Connections - Dometic PERFECTVIEW CAM80AHD Installation And Operating Manual

CAM80AHD
5

Intended use

The CAM80AHD colour camera is designed primarily for use in vehicles. It can be used in video
systems to observe the space around the vehicle from the driver's seat when manoeuvring or
parking, for example.
!
WARNING!
Risk of injury!
Since rear view systems are designed merely as an additional aid for reversing, it does
not relieve you of the duty to take proper care when reversing.
6

Technical description

The camera, which is encased in aluminium housing, transmits image and sound to a monitor via a
cable. The built-in infrared LEDs improve night vision.
The camera transmits the image as if you are looking in the rear mirror.
The camera consists of the following main elements:
No. in
fig. 9, page 5
1
2
3
7

Information on the electrical connections

7.1 Laying cables
A
NOTICE! Risk of damage!
•
To prevent damage, when drilling ensure that there is sufficient space on the other
side for the drill head to come out.
•
Cables and connections which are not properly installed will cause malfunctions or
damage to components. Correct installation of cables and connections is the basic
prerequisite for lasting and trouble-free operation of the retrofitted components.
•
The cables may not be exposed for long periods to solvents such as benzine, as the
solvents can damage the cable.
Please observe the following instructions:
•
As far as possible, use original openings or alternative openings for the connecting cable duct,
e.g. the paneling edges, ventilation grilles or blank panels. If no openings are available, you
must drill holes for the cables. Check beforehand that there is sufficient room for the drill head
to come out on the other side.
EN
Description
6-pin connection cable
Microphone
Infrared LEDs
Intended use
13