Installing The System Board; Coin-Cell Battery; Removing The Coin Cell Battery - Dell Latitude E5470 Owner's Manual

Installing the system board

1. Align the system board with the screw holders on the computer.
2. Tighten the screws to secure the system board to the computer.
3. Connect the speaker cable to the connector on the system and route the cable through the routing channels.
4. Connect the power connector and coin cell battery cables to the connectors on the system board:
5. Install the:
a. power connector port
b. dock frame
c. WLAN
d. heat sink assembly
e. WWAN
f. hard drive assembly
g. keyboard
h. memory module
i. battery
j. base cover
k. SIM card
6. Follow the procedure in

Coin-cell battery

Removing the coin cell battery

1. Follow the procedure in
2. Remove the:
a. base cover
b. battery
c. hard drive assemblyor
d. dock frame
e. memory
f. hard drive assembly
g. keyboard
h. WLAN
i. WWAN
j. dock frame
k. heat sink assembly
l. power connector port
3. To remove the coin cell battery:
32 Disassembly and reassembly
or M.2 SSD or PCIe SSD
After working inside your
Before working inside your
M.2 SSD or PCIe SSD
or M.2 SSD or PCIe SSD
computer.
computer.