Touchpad; Removing The Touchpad Button; Installing The Touchpad Button; Power Connector Port - Dell Latitude E5470 Owner's Manual

Touchpad

Removing the touchpad button

1. Follow the procedure in
2. Remove the:
a. base cover
b. battery
c. dock frame
3. To remove the touchpad button:
a. Lift the latch and disconnect the touchpad button cable from the connector [1] [2].
b. Remove the screws that secure the touchpad button [3].
c. Lift and remove the touchpad button away from the computer [4].

Installing the touchpad button

1. Place the touchpad button into the slot on the system board.
2. Tighten the screws to secure the touchpad button to the system board.
3. Connect the touchpad button cable to the connector on the system board.
4. Install the:
a. dock frame
b. battery
c. base cover
5. Follow the procedure in

Power connector port

Removing the power connector port

1. Follow the procedure in
2. Remove the:
a. base cover
b. battery
Before working inside your
After working inside your
Before working inside your
computer.
computer.
computer.
Disassembly and reassembly 21