Installing the optional PCIe SSD
If the system is shipped with PCIe SSD perform the following steps.
1. Insert the SSD clip into the slot on the computer.
2. Tighten the screw to secure the SSD clip to the computer.
3. Insert the SSD into the connector on the computer.
4. Place the SSD bracket over the SSD and tighten the screws to secure it to the computer.
5. Install the:
a.
battery
b.
base cover
6. Follow the procedure in
Memory modules
Removing the memory module
1. Follow the procedure in
2. Remove the:
a.
base cover
b.
battery
3. Pull the clips securing the memory module until the memory module pops up [1].
4. Remove the memory module from the system board [2].
Installing the memory module
1. Insert the memory module into the memory module socket until the clips secure the memory module.
2. Install the:
a.
battery
After working inside your
Before working inside your
computer.
computer.
Disassembly and reassembly
17