Headlamp High/Low-Beam Changer; Flash-To-Pass; Windshield Wipers - Cadillac 2009 XLR Owner's Manual

If after signaling a turn or a lane change the arrows
flash rapidly or do not come on, a signal bulb could be
burned out.
Have the bulbs replaced. If the bulb is not burned out,
check the fuses. See Fuses and Circuit Breakers
on page 6-83.
Turn Signal on Chime
A chime will remind you if the turn signal is left on for
more than 3/4 mile (1.2 km) of driving.
If you need to leave the turn signal on for more than
3/4 mile (1.2 km), turn off the signal and then turn it
back on.

Headlamp High/Low-Beam Changer

Push the turn signal lever all the way forward to
change the headlamps from low beam to high beam.
When the high beams are on, this light
the instrument panel cluster.
Pull the lever rearward to change the headlamps back
to low beam.
3-8

Flash-to-Pass

This feature lets you use the high-beam headlamps to
signal the driver in front of you that you want to pass.
Pull and hold the turn signal lever toward you to use.
When you do, the following will occur:
•
•

Windshield Wipers

$
appears on
The windshield wiper lever is located on the right side of
the steering column.
If the low-beam headlamps are on, the high-beam
headlamps will turn on. They will stay on as long as
you hold the lever there. Release the lever to turn
them off.
If the headlamps are on high-beam, they will switch
to low-beam. To return to high beam, push the lever
away from you.