Table of Contents
Advertisement
Transferring a Call
Audio can be transferred between the in-vehicle
Bluetooth system and the cell phone.
To Transfer Audio to the Cell Phone
During a call with the audio in the vehicle:
b g
1. Press
. The system responds with "Ready"
followed by a tone.
2. Say "Transfer Call." The system responds with
"Transferring call" and the audio will switch from
the vehicle to the cell phone.
To Transfer Audio to the In-Vehicle
Bluetooth System
The cellular phone must be paired and connected with
the Bluetooth system before a call can be transferred.
The connection process can take up to two minutes after
the key is turned to the ON/RUN or ACC/ACCESSORY
position.
During a call with the audio on the cell phone,
b g
press
for more than two seconds. The audio
switches from the cell phone to the vehicle.
3-86
Voice Pass-Thru
Voice Pass-Thru allows access to the voice recognition
commands on the cell phone. See the cell phone
manufacturers user guide to see if the cell phone
supports this feature. This feature can be used to
verbally access contacts stored in the cell phone.
b g
1. Press and hold
responds with "Ready" followed by a tone.
2. Say "Bluetooth". The system responds with
"Bluetooth ready" followed by a tone.
3. Say "Voice". The system responds with "OK,
accessing <phone name>".
•
The cell phone's normal prompt messages will
go through its cycle according to the phone's
operating instructions.
for two seconds. The system
Advertisement
Chapters
Table of Contents
