Table of Contents
Advertisement
Adjusting and Removing Backrest
To Recline Backrest
Recline the backrest by pushing
on the backrest release tab and
rotate top of seat back about an
inch.
The restraint is now in semi-
reclined position.
The backrest has 2 positions,
upright and semi-reclined.
The semi-recline position is
to be used only to install the
booster seat flush against the
vehicle seat back, if needed.
To Remove Backrest
Press in firmly on backrest
release tab and rotate backrest
back until it lays flat (horizontal).
Lift backrest hook out of the
opening in seat base. Store
backrest for future use.
8
Cup Holder
The cup holder is located on the side of
the booster seat as shown.
Pull out cup holder to use.
Push cup holder in when not needed.
9
Advertisement
Table of Contents
