Hifonics BRX4000D Owner's Manual page 29

HF-HLA
You can simplify the installation of the high level speaker
connections, if you use the separately available hi-to-lo
adaptors HF-HLA from HiFonics. You may find the adaptors
at your car audio retailer.
With the HF-HLA you just need to connect the bared speaker
cables in the regarding ports and connect the RCA jacks with
LINE IN on the amplifier.
Please ensure the correct polarity of the connections.
Usually the "+" positive cables are red or dark grey,
With one HF-HLA adaptor you are able to connect
one channel pair, this means for a 4-channel amplfier
you need two adaptors.
HF35WK
PREMIUM WIRE KIT
• 35 mm Powercable, 5 m,
2
• 35 mm Groundcable, 1 m,
2
• ANL Fuseholder with 150 A Fuse
• Twisted, triple-shielded Stereo-RCA-cable,
silvered metal jacks, included remote-wire,
directional-ground-looped, 5 m
BALANCED INPUT
With the optional BALANCED INPUTS, HiFonics offers absolutely state-of-the-art-technology. Balanced inputs have been used for many
years in professional sound studios and high end home stereo systems. Unlike the regular unbalanced RCA's connections, balanced
wires are insusceptible against interferences of the vehicle's electronics. For this system, a separate signal transmitter like described
below is required.
HF2BLT
Balanced-Line-Transmitter for 2-Channel- or
Mono-Amplifiers in a stable metal-housing.
With RCA-Inputs and Balanced-Line-Outputs.
Incl. Balanced Line Cable (5 m).
ADDITIONAL ACCESSORIES
SPEAKER CABLES
–
R
+
+
L –
HF4BLT
Balanced-Line-Transmitter for 4-Channel- or
two Mono-Amplifiers in a stable metal-housing.
With RCA-Inputs and Balanced-Line-Outputs.
Incl. 2 x Balanced Line Cable (5 m).
TO THE LINE IN OF
THE AMPLIFIER
29