Huawei AP7052DN Hardware Installation And Maintenance Manual page 84

AP7052DN&AP7152DN
Hardware Installation and Maintenance Guide
Procedure
Step 1 Remove a 16-mm (0.63 in.) long section of the jacket, as shown in Figure 5-76.
When you remove the shield layer, do not damage the insulation of the twisted-pair cable.
Figure 5-76 Removing the jacket of a twisted-pair cable (unit: mm (in.))
Step 2 Align the four pairs of wires and cut the ends neatly, as shown in Figure 5-77. The
connections between the wires and the pins are listed in Table 5-9.
Figure 5-77 Connections between wires and pins (unit: mm (in.))
Pin 8
Table 5-9 Connections between wires and pins (using a straight-through cable as an example)
Matching Pins of Wires
1
2
3
4
5
6
7
Issue 01 (2017-12-29)
Pin 1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
White-Orange
Orange
White-Green
Blue
White-Blue
Green
White-Brown
Brown
16
Wire Color
White-Orange
Orange
White-Green
Blue
White-Blue
Green
White-Brown
5 Appendix
C
77