Huawei AP7052DN Hardware Installation And Maintenance Manual page 40

AP7052DN&AP7152DN
Hardware Installation and Maintenance Guide
Power Supply Mode
Troubleshooting Procedure
Power Supply Mode
Power supply using a power module
PoE power supply
Issue 01 (2017-12-29) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Possible Cause
is disabled or the power-off time range is
improperly set).
 The line is faulty (the network cable or
distribution frame is damaged).
 The device is faulty.
Troubleshooting Procedure
1. Check whether the device is powered
off.
2. Check that the power cable is securely
connected to the device.
3. Check whether the power supply is
normal.
Replace the power adapter with a normal
one. If the device is powered on, the
original power adapter is faulty. Contact
technical support personnel or Huawei
agent and ask them to replace the power
adapter.
4. If the device still cannot be powered on,
the device itself is faulty. Contact
technical support personnel or Huawei
agent and ask them to replace the device.
1. Check whether the power sourcing
equipment supports PoE or is faulty.
2. Check whether the power output mode
of the power sourcing equipment is
supported by the powered device.
3. Check whether the power sourcing
equipment can support the maximum
power consumption of the device.
4. Check whether the configuration on the
power sourcing equipment causes PoE
power supply errors, such as the PoE
function is disabled or the power-off
time range is incorrectly set.
5. Check whether the network cable or
distribution frame is faulty.
6. If the device still cannot be powered on,
the device itself is faulty. Contact
technical support personnel or Huawei
agent and ask them to replace the device.
4 Hardware Failures
33