Step 7; Figure 11; Tool(S) - Husky CWR48B Use And Care Manual

Assembly Instructions

Step 7

Install the Wire Deck (E) by fitting into the front and rear shelf support assembly (see Figure 11).

Figure 11

Step 8
Finally, tighten all six Lag Bolts into the wall (see Figure 12).
Assembly is now complete. Periodically check to made sure all nuts and bolts are securely fastened. Keep this
manual for future reference.
E
✓
Figure 12

Tool(s):

1/2"Socket
Wrench
6
✓
✓