Reprogramming Universal Home Remote Buttons; Erasing Universal Home Remote Buttons - Cadillac 2009 Escalade Owner's Manual

Cadillac 2009 escalade suv owner's manual

Hide thumbs Also See for 2009 Escalade:

Table of Contents

Using Universal Home Remote

Press and hold the appropriate button for at least

half of a second. The indicator light will come on

while the signal is being transmitted.

Reprogramming Universal Home

Remote Buttons

Any of the three buttons can be reprogrammed by

repeating the instructions.

Erasing Universal Home Remote

The programmed buttons should be erased when the

vehicle is sold or the lease ends.

To erase either Rolling Code or Fixed Code on the

Universal Home Remote device:

1. Press and hold the two outside buttons at the

same time for approximately 20 seconds, until

the indicator lights, located directly above the

buttons, begin to blink rapidly.

2. Once the indicator lights begin to blink, release both

buttons. The codes from all buttons will be erased.

For help or information on the Universal Home Remote

System, call the customer assistance phone number

under Customer Assistance Offices on page 8-6.

Chapters

Table of Contents

2009 escalade esv