Table of Contents
Advertisement
Mounting kit: 2 mounting brackets and screws
Four rubber feet with adhesive backing
ESD wrist strap
One AC power cord
Product documentation
If any item is found missing or damaged, please
contact your local Enterasys Sales Representative for
replacement.
Installation
Use the following guidelines when choosing a place to
install the Switch:
The surface must support at least 3 kg.
The power outlet should be within 1.82 meters
(6 feet) of the device.
Visually inspect the power cord and see that it is
secured to the AC power connector.
Make sure that there is proper heat dissipation
from and adequate ventilation around the switch.
Do not place heavy objects on the switch.
Desktop or Shelf Installation
When installing the Switch on a desktop or shelf, the
rubber feet included with the device should first be
attached. Attach these cushioning feet on the bottom at
each corner of the device. Allow adequate space for
ventilation between the device and the objects around
it.
9033693-01
36
Advertisement
Table of Contents
