Chapter 1: Introduction; Overview - Enterasys SecureStack C2 C2G124-24 Hardware Installation Manual

This chapter introduces the C2G124‐24, C2G124‐48, and C2H124‐48 stackable switches.
Depending on the firmware version used in the switch, some features described in this document
may not be supported. Refer to the Release Notes shipped with the C2G124-24, C2G124-48
C2H124-48

Overview

The C2G124‐24, C2G124‐48, and C2H124‐48 are stackable Gigabit Ethernet switches,
which can be adapted and scaled to help meet your network needs. These switches
provide a management platform and uplink to a network backbone for a stacked group of
up to eight C2 switches. The four built‐in Small Form Pluggable (SFP) interface slots
provide you with the option of installing Mini‐GBICs for 1000BASE‐T compliant copper
connections or 1000BASE‐SX/LX fiber‐optic connections.
The switches also support the use of a redundant DC power supply to help prevent
downtime due to an internal power supply failure in the switch or AC power source.
You can install the switch on a flat surface or into a standard 19‐inch rack with user‐
supplied mounting hardware, and configure the switch functions using the WebView™
application, CLI switching commands, and/or SNMP.
to determine which features are supported.
Important Notice
Introduction
SecureStack C2 Installation Guide 1-1
1
and