Deleting The Registered Dp-Id - Yaesu FTM-3200DR Operating Manual

Advanced Operation
5. Press and hold the [D/A(GM)] key to save
the setting.
• When registering in the DP-ID list is
finished, "COMPLETE" is displayed, then
the display returns to the DP-ID list screen.
• To continue operating without registering
the DP-ID, press the [D/A(GM)] key.
• If registering several DP-IDs, repeat steps 4 to 5.
• A maximum of 24 stations may be registered.
6. Press and hold the [MHz(SETUP)] key to return to normal operation.
Register the DP-ID of all the transceivers in the group to another transceiver using
the same operation.
Notes:
z Once the DP-ID is registered, the DP-ID is stored until the DG-ID is deleted.
z Register with the another transceiver while each other's transceivers are nearby.

Deleting the registered DP-ID

1. Press and hold the [MHz(SETUP)] key to
enter the Set-up Menu.
2. Rotate DIAL knob to select "DPID LST 13".
3. Press the [MHz(SETUP)] key.
The DP-ID List is displayed.
4. Rotate the DIAL knob to select the call sign.
5. Press and hold the [D/A(GM)] key
The confirmation screen is displayed.
6. Press and hold the [D/A(GM)] key again to
delete.
• When deleting in the DP-ID list is finished,
"COMPLETE" is displayed for three
seconds, then the display returns to the
DP-ID list screen.
• To return to normal operation without deleting
the DP-ID, press the [D/A(GM)] key.
• If deleting several DP-IDs, repeat steps 4 to 6.
7. Press and hold the [MHz(SETUP)] key to
return to normal operation.
26
FTM-3200DR/DE Operating Manual