Yaesu FTM-3200DR Operating Manual page 13

[ SQL ( TXPO )] key

Press and hold the key in for over one second to select the transmit power (HIGH: 65
W / MID: 30 W / LOW: 5 W).
[ REV ( DW )] key

During split-frequency operation, such as through a repeater, this key reverses the
transmit and receive frequencies.
Press and hold the key in for over one second to activate the Dual Watch feature.
Note: For details, refer to the Advanced Manual (download from the Yaesu website).
[ D/A ( GM )] key

Briefly pressing each time switches the operating band communication mode.
Press and hold in this key for over one second to activate the GM (Group Monitor)
function.
Note: For details on the GM function, see "GM (Group Monitor) Function" on 35
[ MHz ( SETUP )] key

This key allows tuning in 1 MHz steps (the MHz digits will blink on the display).
Press and hold this key in for over one second to activate the Setup (Menu) Mode.
[ V/M ( MW )] key

Pressing this key briefly, switches between VFO mode and memory mode. Press and
hold the key for over one second to display the memory registration screen.
Power/Lock key

Press and hold in this key for over one second to switch the power between ON and
OFF. Briefly pressing the key while the transceiver is turned ON engages or releases the
key lock.
Speaker
The internal speaker is located here.
LCD Display
The main digits on the display may show the operating frequency, memory name, or
any of many parameters during Menu setup.
(Continuous Tone Coded Squelch System)
Repeater Shift Direction
GM Feature Active
Frequency/Message
Area
LOW/MID TX Power Selected
FTM-3200DR/DE Operating Manual
CTCSS/DCS/EPCS Bell Paging
DCS (Digital Code Squelch)
CTCSS
Narrow Deviation
S and TX Power Meter
Front Panel Controls & Switches
Lock Feature Active
AMS Function
Communication mode
DTMF Memory Mode
SKIP/Preferential Scan Channel
HOME Channel
Memory mode
Memory Channel Number
GM Feature Communica-
tion range indicator
13