Table of Contents
Advertisement
Fig. 6
Pump filter
The pump filter system helps to prevent the ingress of lint or foreign
objects into the drain pump, reducing the risk of damage. The pump
filter should be cleaned regularly, every two to three months at least.
To avoid injury, do not carry out this operation when the wash
water is at a temperature over 30ºC. Disconnect the appliance
from the power supply first.
To clean the filter (images on page 24):
•
Unplug the appliance.
•
Place a container under the filter to collect the flow of remaining
water from the machine.
•
Loosen the filter cover by turning it slowly anti-clockwise until the
remaining water has drained away.
•
When all the water has drained out of the machine, turn the filter
cover several times until the filter can be completely removed.
•
Remove any objects caught in the filter and the housing.
•
Clean the filter under running water.
•
Refit the filter by turning it clockwise. Ensure the filter is properly
fitted.
Fig. 7
23
Advertisement
Table of Contents
