Table of Contents
Advertisement
Child lock
The child lock function ensures that the programme will not be
affected if any buttons are pressed accidentally.
The child lock function should be activated after the wash programme
has been selected together with any extra functions.
To activate the child lock, press and hold 'Temperature selection' and
'Spin speed' buttons together for approximately 3 seconds.
The display will show the
symbol when the child lock is active
To deactivate the child lock, press and hold 'Temperature selection'
and 'Spin speed' buttons together again for approximately 3 seconds.
Power cuts
If there is a power cut, when the electricity comes back on the
washing programme will continue to run from where it
stopped.
Switching the sound signal on/off
To activiate this function, press and hold 'Temperature selection' for
about 3 seconds. A sound will be heard to confirm the activation. To
deactivate it simply press and hold the button again for 3 seconds.
Energy saving mode
About 10 minutes after the end of a wash programme, the display
switches to energy saving mode. Instead of 'End' the display will
:
blink '
'. The energy saving mode will also activate after about 10
minutes of the standby button being pressed if a programme has not
been selected.
19
Advertisement
Table of Contents
