Table of Contents
Advertisement
Note: The drum is lit up after the
door is opened and closed and once
the programme has started. The light
goes out automatically.
13.2 Setting a programme
Set the programme selector to the
1.
required programme.
→ "Programmes", Page 28
If necessary, adjust the pro-
2.
gramme settings → Page 45.
Setting additional programmes
Set the ... further programme.
1.
Press
to call up the sub-menu
2.
for additional programmes.
Select a programme.
3.
Press Main menu to call up the
4.
main menu.
Adjust the programme settings if
5.
required.
Start the programme.
6.
13.3 Adjusting the pro-
gramme settings
Requirement: A programme has
been set.
→ "Setting a programme", Page 45
Adjust the programme settings.
▶
→ "Programmes", Page 28
Please follow the information about
operating logic → Page 20.
Note: The programme settings are
not saved permanently for the pro-
gramme.
Adjusting additional programme
settings
Press
to call up the sub-menu
1.
for the additional programme set-
tings.
Select the programme settings.
2.
The programme settings are not
saved permanently for the pro-
gramme.
Press
to call up the main
3.
menu.
13.4 Saving the programme
settings
Set the Memory programme.
1.
Press
to call up the sub-menu
2.
for the memory programmes.
Select a programme.
3.
Basic operation en
45
Advertisement
Table of Contents
