Operations Cannot Be Performed Through The Remote Control Unit; Display On This Unit Shows Nothing - Denon AVR-S760H Owner's Manual

Integrated network av receiver
Table of Contents

Advertisement

Contents
Connections

Operations cannot be performed through the remote control unit

Operations cannot be performed through the remote control unit.
Batteries are worn out. Replace with new batteries. (v p. 9)
0
Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within 30°. (v p. 9)
0
Remove any obstacle between this unit and the remote control unit.
0
Insert the batteries in the proper direction, checking the q and w marks. (v p. 9)
0
The set's remote control sensor is exposed to strong light (direct sunlight, inverter type fluorescent bulb light, etc.). Move the set to a place in which the
0
remote control sensor will not be exposed to strong light.
The operation target zone does not correspond to the zone setting specified on the remote control unit. Press the MAIN or ZONE2 button to select the
0
operating zone of the remote control. (v p. 146)
When using a 3D video device, the remote control unit of this unit may not function due to effects of infrared communications between units (such as TV
0
and glasses for 3D viewing). In this case, adjust the direction of units with the 3D communications function and their distance to ensure they do not
affect operations from the remote control unit of this unit.

Display on this unit shows nothing

Display is off.
Set "Dimmer" on the menu to something other than "Off". (v p. 207)
0
Front panel
Display
Playback
Settings
221
Rear panel
Tips
Remote
Index
Appendix

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents