Sp.virtualizer; Dts Neural:x; Delay Time; Effect Level - Denon AVR-S760H Owner's Manual

Contents Connections
o Sp.Virtualizer
The Speaker Virtualizer enhances the surround and height speaker
channels to create an enveloping virtual surround effect.
On
(Default):
Off:
0 You can set this when the sound mode is "Dolby Atmos", "Dolby Surround" or
sound mode that has "+Dolby Surround" in the sound mode name.
0 Usable when not using height, ceiling or Dolby Atmos Enabled speakers, or
when not using surround speakers.
0 Audio is not output from the surround back speaker if "Sp.Virtualizer" is set to
"On" when "Speaker Config." - "Surround Back" is set to "1 spkr" in the menu.
o DTS Neural:X
DTS Neural:X Expands the non-object based audio signals and
optimizes them for your speaker configuration.
On
(Default):
Off:
0 You can set this when sound mode is "DTS:X" or "DTS:X MSTR".
Front panel Display
Playback
Enables "Sp.Virtualizer".
Disables "Sp.Virtualizer".
Use "DTS Neural:X".
Do not use "DTS Neural:X".
Rear panel
Settings
o Delay Time
Adjust the audio delay time against video to extend the sound field
image.
0 ms – 300 ms (Default: 30 ms)
0 You can set this when the sound mode is "Matrix".
o Effect Level
Adjust the sound effect level of the current sound mode.
1 – 15 (Default: 10)
0 This item can be set when sound mode is "Rock Arena", "Jazz Club", "Mono
Movie" and "Video Game".
0 Set to a lower level if the positioning and sense of phase of the surround
signals seems unnatural.
150
Remote
Tips Appendix
Index