Ricoh Pro 8300 Series Cip Training page 34

CIP Training C7200 series CIP Training Pro 8300 series
Adjustment Settings for Operators
Adjustment Settings for Operators
0802 Z-fold Position 2
Adjust the overall fold size (L) of the Z-foldout sheets when using the fold unit.
Press [ + ] to increase and [ - ] to reduce (L).
The mark indicates the leading edge (relative to the paper feed direction), and the
mark indicates the trailing edge.
Setting Items
A3 SEF
B4 JIS SEF
A4 SEF
12 × 18 SEF
11 × 17 SEF
1
8 / × 14 SEF
2
1
8 / × 11 SEF
2
8K SEF
Other Paper Sizes
0803 Half Fold Position: 1 sheet Fold
Adjust the edge width of the half folded sheets (1 sheet fold) when using the fold unit.
Press [ + ] to increase and [ - ] to reduce (S).
This setting will be applied if the single-sheet fold function is enabled.
The mark indicates the leading edge (relative to the paper feed direction), and the
mark indicates the trailing edge.
L
S
Paper feed direction
DWP561
Default
Value
0.0
Max. Min.
Step
Value Value
4.0 -4.0 0.2
Unit
mm