Warnings And Instructions - Philips EasyAir SNS410 MC Design-In Manual

Warnings and instructions

4 Design-in Guide - EasyAir SNS210 MC
• EasyAir SNS210 MC, SNS410 MC must be used with Philips
Xitanium SR LED drivers.
• Do not apply mains power directly to the sensor.
• Do not cover the sensor during operation or mount the
sensor internal to the luminaire.
• External infrared light source in the space might have
influence on occupancy detection.
• Incorrect location of sensor (e.g., with setting up of
multiple SNS210 devices into a single network or a group
with addition of qualified wireless switches obstructions
in viewing angle) will result in incorrect functioning of
occupancy detection.
• Faulty settings of the sensor might result in undefined
startup.
• Make sure the sensor, especially the occupancy detection
lens, is protected from damage during shipment and
handling.
• The application area of EasyAir SNS210 MC is designed
for a typical indoor environment (open/private offices,
conference rooms, classrooms, corridors, etc.) in normally
heated and ventilated areas. EasyAir SNS210, SNS410has
no protection against aggressive chemicals or water.
• Make sure the the EasyAir SNS210 MC, SNS410 MC
Zigbee/Bluetooth antenna is not covered by metal for
proper RF communication.
August 2021