Table of Contents
Advertisement
Installing EasyAir SNS210 MC, SNS410 MC with ceiling mount bracket (CMP/W)
The ceiling mount CMP bracket is available as a bracket without any pre-mounted sensor or cable. The luminaire
manufacturer needs to mount the sensor in the CMP bracket and attach cable to it. The cable and screws are available with
the accessory.
Caution: The cable length from the EasyAir sensor to SR driver should be kept <2m.
For cut-out in the ceiling and mounting, refer to the figures below. All dimensions are in mm.
Radius min 5 mm
August 2021
15
Design-in Guide - EasyAir SNS210 MC
Advertisement
Table of Contents
