Oki ES6405 User Manual page 38

ITEM
Print X
Setup Dimension
(cont.)
Y
Dimension
PCL Setup Font Source Resident
Font
Number
Font Pitch
SETTINGS
64 mm
~
210 mm
~
216 mm
127 mm
~
297 mm
~
1321 mm
I0 ~ I90
0.44 CPI
~
10.00 CPI
~
99.99 CPI
38
– ES6405 User's Guide
EXPLANATION
Specifies paper width of Custom
paper as a default value.
Sets a paper size at right angles
to the paper run direction.
Specifies paper length of Custom
paper as a default value.
Sets a paper size in the same
direction as the paper run
direction.
Specifies the location of PCL
default font.
Sets the PCL font number.
The valid range of this variable
changes depending on the FONT
SOURCE setting at the time. If
the default font is set for FONT
SOURCE, the number starts at 0.
If it is not, the number starts at
1. The maximum value is equal
to the number of fonts installed
in FONT SOURCE.
Width of the PCL default font in
characters per inch (CPI).
Default font is fixed-pitch,
scalable font.
The value of pitch is displayed
down to the second decimal
place.
Displayed only when the font
selected in Font No. is a fixed-
spacing, scalable font.