Oki ES6405 User Manual page 35

ITEM
Network Telnet
Setup
(cont.)
FTP
IPSec
SNMP
Network
Scale
Hub Link
Setting
SETTINGS
Enable
Disable
Enable
Disable
Enable
Disable
Enable
Disable
Normal
Small
Auto
Negotiate
100Base-TX Full
100Base-TX Half
10Base-T Full
10Base-T Half
35
– ES6405 User's Guide
EXPLANATION
Sets Enable/Disable of Telnet.
Enable: Telnet is available.
Disable: Telnet is not available.
Display Condition:TCP/IP should
be enabled.
Sets Enable/Disable of FTP.
Enable: FTP is available.
Disable: FTP is not available.
Display Condition: TCP/IP should
be enabled.
Sets Enable/Disable of IPSec.
Enable via the web.
Enable: IPSec is available.
Disable: IPSec is not available.
Sets Enable/Disable of SNMP.
Enable: SNMP is available.
Disable: SNMP is not available.
Display Condition: TCP/IP or
NetWare should be enabled.
When Normal is selected, the
network can work effectively
even when it is connected to a
HUB that has a spanning tree
feature. However, printer start
up time gets longer when
computers are connected with
two or three small LANs.
When Small is selected,
computers can cover from two or
three small LANs to a large LAN,
but may not work effectively
when the network is connected
to a HUB with a spanning tree
feature.
Sets a method to link to a HUB.
When Auto is set, a connection
method to a HUB is selected
automatically and attempts to
connect. If another method is
selected, attempts to connect to
a HUB only by the selected
connection method.