Tcp/Ip Setting; Lan Interface Setup - Encore ENHWI-G2 User Manual

802.11g wireless router

Hide thumbs Also See for ENHWI-G2:

Table of Contents

TCP/IP Setting

To set up the configuration of LAN interface, Private IP of you router LAN

Port and Subnet mask for your LAN segment.

Configuration

IP address

Subnet Mask Subnet Mask of you LAN (Default 255.255.255.0)

DHCP Server

DHCP Client

Range

802.1d

Spanning tree

Enable UPnP

The IP of your Router LAN port (Default 192.168.1.1)

To give your LAN Client an IP, you have to enable

"DHCP Server". If not, manual setting up your client IP

is necessary when you want to use the router as your

client's default gateway.

Specify the DHCP Client IP address range. You can

also click the "Show Client" button to listed those

connected DHCP clients.

To prevent from network loops and preserve the

quality of bridged network

Mark this checkbox to allow this router to be

recognized by uPnP.

Table of Contents