Installing And Using Wireless Router; Network Configuration Setup - Encore ENHWI-G2 User Manual

Installing And Using Wireless Router

This Chapter provides a step-by-step guide to the installation and configuration
of ENCORE Wireless Router. We suggest you go over the whole chapter and
then do more advanced operation.

Network configuration setup

Steps to build up the network:
Connect the ADSL or Cable modem to the Ethernet WAN port on the back of
ENCORE Wireless Router by using the UTP cable.
Connect the phone line from the wall socket to the line-in port on the ADSL
modem, or the coaxial cable to the line-in port on the Cable modem.
Plug-in the power adapter to the modem and turn on the power. Install the
Ethernet card into the computer by referring to the User Guide that came with
the card.
Connect the computer toENCORE Wireless Router by using standard
twisted-pair Ethernet cable from the computer's Ethernet card to an
10/100Mbps Ethernet port on the back of ENCORE Wireless Router.
Plug-in the power adapter to the Router and the other side to the wall outlet.
7