Wan Interface Setup; Static Ip Mode - Encore ENHWI-G2 User Manual

WAN Interface Setup

This page allows users to configure those parameters for connecting to
Internet. You may select the WAN Access Type from the drop list and configure
parameters for each mode.

Static IP Mode

IP Address, Subnet Mask
and Default Gateway
DNS 1, 2 and 3
DHCP Client Mode
Attain DNS automatically:
Set DNS Manually
Fill in the IP address, Subnet Mask and Default Gateway
that provided by your ISP.
To specify the DNS, and enter the DNS provided by your
ISP in DNS 1 2 3.
If your DNS provide by ISP is dynamic, choose
"Attain DNS automatically
To specify the DNS, and enter the DNS provided by your
ISP in DNS 1 2 3.
26