Advertisement
Product Specifications and Details
Supported ADSL Standards
• ANSI T1.413 issue 2
• ITU-T G.992.1 (G.dmt)
• ITU-T G.992.2 (G.lite)
• G.994.1 (G.hs, Multimode)
• ITU-T G.992.3 (ADSL2 G.dmt.bis)
• ITU-T G.992.4 (ADSL2 G.lite.bis)
• ITU-T G.992.5 (ADSL2+,Annex A, B, I, J, L
& M)
• Reach Extended ADSL (RE ADSL)
ATM Support
• Support up to 8 PVCs ATM Forum UNI
3.1/4.0 PVC Traffic Shaping UBR, CBR,
VBR-nrt
Multi Protocol over AAL5 (RFC1483 /
2684)
• Classical IP over ATM (RFC 1577)
• OAM F4 and F5 segment end-to-end
loopback, AIS, and RDI
• OAM cells
• VC and LLC Multiplexing
• VPI is 0-255 and VCI is 32-65535
• ATM SAR (Segmentation and
Reassembly)
• PPP over Ethernet (RFC 2516)
• PPP over ATM (RFC 2364)
• PPP over PAP (Password Authentication
Protocol; RFC1334)
• PPP over CHAP (Challenge Authentication
Protocol; RFC1994)
Bridging and Routing
• Ethernet to ADSL self-learning
• Transparent Bridging (IEEE 802.1D)
• IP routing-RIPv2 (backward compatible
with RIPv1)
• Routing (TCP/IP/UDP/ARP/ICMP)
• Static IP routing
• ICMP (Internet Control Message Protocol)
• IGMP (Internet Group Management
Protocol)
• IP Multicast IGMP v1/v2
• MIB II Support (RFC1213)
• PAT (Port Address Translation)
Encore Electronics 2005
ENDSL-AR4
Security
• PAP (Password Authentication Protocol)
• CHAP (Challenge Authentication Protocol)
• User authentication for PPP
• Password Protected System Management
• VPN (IPSec, PPTP, L2TP) Pass-Through
HTTP Web-based management
• Firmware upgrade via FTP / TFTP (Web-
based)
• SNMP Support
• WAN and LAN connection statistics
• Selection of Bridge or Router Mode
• Configuration of VCs (Virtual Circuits)
• Configuration file backup and restore
Hardware Interface
• One USB port compliant with USB v1.1, full
speed (12Mbps)
• Four RJ45 ports compatible with IEEE
802.3/802.3u, 10/100Mbps auto selection
• One RJ11 port for ADSL connection
• One Power switch button for power on/off
• One reset button for restoration of factory
default setting
Support Operating Systems
• Windows 9X, ME, 2000, XP,Linux and
MAC
Power Requirement
• Power Adapter: Input 110+10 or 230+10
• VAC, Output 12VAC, 1000mA
Power Consumption: less than 10 Walt
Environmental
• Operating temperature: 0°C ~ 70°C
ambient
• Humidity: 5 % ~ 95 % (non condensing)
• Storage temperature:-40°C ~ 70°C
3
Advertisement
