Display; Installing And Replacing Backup Batteries - Timex T231Y Quick Start Manual

When lit,
indicates
Buzzer or Radio
is Alarm 1
alarm source.
If neither is lit,
Alarm 1 is not
armed
Your new Timex Clock Radio includes a battery backup system that will maintain the
time and alarm settings during a temporary power interruption.
1
1. Keep unit connected to AC power when changing batteries to avoid losing your
settings.
2. Press on the battery door locking tab to open and remove the battery door.
3. Check the correct polarity (+/ - ) markings in the battery compartment and install two
"AAA"batteries (not included).
4. Replace the battery door.
NOTE: With batteries installed, the display will turn off during a power failure but the
clock will continue to run and maintain your alarm settings. The alarm will not sound
when operating on batteries.
When lit,
indicates time
Time display
displayed is PM

Installing and Replacing Backup Batteries

2

Display

When lit, indicates backup
batteries should be replaced
Press
3
3
When lit,
indicates
Buzzer or Radio
is Alarm 2
alarm source.
If neither is lit,
Alarm 2 is not
armed