Attaching Tools For Hand Vac Use; Emptying The Dirt Tank - Bissell CLEANVIEW 2831 Series Quick Start Manual

Attaching Tools for Hand Vac Use

Go to support.BISSELL.com for tips on above floor cleaning tools.
Clean stairs or furniture easily with the tools provided. Pair your desired tool with the hand vacuum
or extension wand. Note: Ensure the vacuum is OFF when connecting tools.
1.
To use as a hand vacuum,
press the release button
to disconnect it from the
extension wand.

Emptying the Dirt Tank

More of a video person? Go to support.BISSELL.com for additional how-to videos.
1.
Turn OFF your machine.
Remove the dirt tank from
the hand vacuum by pressing
the tank release button on the
front of the tank.
4.
Dump dirt from the tank
into the trash bin.
WARNING
place. DO NOT operate your vacuum without the filter.
2.
Attach your chosen tool.
2.
Grab the middle grip from
the filter and pull up. This will
activate a wiping feature to
remove debris from the mesh
filter screen. Twisting the grip
will remove the filter only.
5.
Slide the separator back
into the tank, ensuring the
notch is seated into the tank
correctly.
Before using your vacuum, make sure that the dirt tank is in locked position and that the filter is in
3.
Use the tool to clean
furniture, stairs or other
surfaces in your home.
3.
Fully remove the separator
from the tank and tap the
mesh screen on the side of the
trash bin.
2
1
6.
Put the whole tank into the
hand vacuum by guiding the
notched out area on the bottom
of the tank onto the hook on the
hand vacuum. Push into place.
BISSELL.com 5