Important Instructions For Safety And Environment - Beko BDP710MG User Manual

Important instructions for safety and
environment
1.1.1 Electrical safety
A
Electrical safety instructions should be followed
while electrical connection is made during the
installation.
A
The appliance must not be supplied through an
external switching device, such as a timer,or
connected to a circuit that is regularly switched on
and off by utility.
• Connect the dryer to a grounded outlet protected by
a fuse at the value specified on the type label. (See
Overview) Have the grounding installation performed by
a qualified electrician. Our company shall not be liable for
any damages that will arise when the dryer is used without
grounding in accordance with the local regulations.
• The voltage and allowed fuse protection is stated on the
type label plate.(See Overview)
• The voltage specified on the type label must be equal to
your mains voltage. (See Overview)
• Unplug the dryer when it is not in use.
• Unplug the dryer from the mains during installation,
maintenance, cleaning and repair works.
• Do not touch the plug with wet hands! Never unplug by
pulling on the cable, always pull out by grabbing the plug.
• Do not use extension cords, multi-plugs or adaptors to
connect the dryer to power supply in order to decrease the
risk of fire and electric shock.
• Power cable plug must be within easy reach after
installation.
4 / EN
Dryer / User Manual