JUKI HZL-F Series Instruction Manual page 71

Centered insertion
Seam line
1
Basting
Teeth
2
0.7 to 1 cm
Fabric (right side)
3
Reverse stitches
0.7 to 1 cm
4
Baste zipper and garment body.
Slider
Zipper (back)
Fabric (wrong side)
Sew the left part of the zipper on the seam allowance from the
bottom of the opening to the top.
Set on right
Zipper tape
Sew the right part of the zipper.
Set on left
Undo only the basting stitches.
Open the seam allowance. Fit the teeth of the zipper at the end of the seam
line and perform basting by hand. Pull the slider tab to the up side.
Sew 0.7 to 1 cm from the seam line.
Sew reverse stitches a few times.
Sew the other side 0.7 to 1 cm from the seam line.
70