Ricoh Pro 8300 Series Cip Training page 72

CIP Training 8300 Series
Misfeed U Three-tray wide LCT
1. Open the Three-tray wide LCT front
cover and check for lighting LEDs
indicating the misfed paper.
3. Turn knob U2 clockwise.
4. Remove the misfed paper, and then check LED light is off.
If you cannot remove the misfed paper, proceed to the next steps.
5. When the LED in the illustrations lights up, lower the lever U3.
2. When the LED in the illustrations
lights up, lower the lever U1.