Ricoh Pro 8300 Series Cip Training page 28

CIP Training 8300 Series
Misfeed L
Misfeed: When L is displayed
How do I clear a misfeed when L is displayed?
Follow the procedure below to remove the jammed paper.
1. Open the stacker control panel cover.
3. 3. After the blue LED on the upper left
blinks, check the red LED on the lower
right lights up.
5. Remove the paper that is visible in the
paper output unit.
2. Press the button that is lit in red.
4. Open the high capacity stacker front
cover.
6. Close the high capacity stacker front
cover.