Table of Contents
Advertisement
Contents of the package
•
One handset
•
One battery cover (rear cover for the handset)
•
One battery
•
One charging cradle incl. power adapter
•
One belt clip
•
One rubber cover for the headset socket
•
One rubber cover for the USB connection
•
One user guide
The charging cradle is designed for use in closed, dry rooms within a temperature
range of +5°C to +45°C.
Never expose the telephone to heat sources, direct sunlight or other electrical
devices.
Protect your telephone from moisture, dust, corrosive liquids and vapours.
The device's feet do not usually leave any marks on surfaces. However, due to the
multitude of different varnishes and polishes used on furniture, contact marks on the
surfaces cannot be completely ruled out.
This device is only suitable for a maximum installation height of 2 m.
Connecting the charging cradle
Connect the flat plug of the power
adapter
.
1
Plug the power adapter into the power
socket
.
2
To remove the plug from the charging cradle
again:
Disconnect the power adapter from the
mains power supply.
Press the release button
Pull out the plug
Getting started
.
3
.
4
Availability and operation of the functions
may differ on your telephone.
Getting started
2
1
4
3
7
Advertisement
Table of Contents
