Table of Contents
Advertisement
Network mailbox
Network mailbox
Each network mailbox accepts incoming calls made via the corresponding line. To record all
calls, a network mailbox must be set up for all handset connections.
The network mailbox has been requested from the network provider.
A network mailbox might need to be set up on the phone system or in the base
configuration.
The network mailbox is automatically called via the corresponding connection. An
automatic area code specific to the phone is not prefixed.
The network mailbox messages can be played back using the phone's keypad (digit
codes). In the configuration of the phone system / base, conversion of the digit codes
to the DTMF signals used by the provider must be set.
Enable network mailbox / Enter number
On the handset, you can manage the network mailboxes that are assigned to one of its receive
connections.
. . . use
use
to select connection if applicable
For a fixed line network/connection
. . . use
to enter or amend the network mailbox number
To activate/deactivate the network mailbox for the fixed line network connection
use the phone number and a function code of your network provider. Please contact
the network provider if you require any further information.
For a VoIP connection
Activate/deactivate network MB:
Enter number:
Save settings:
30
to select
Answer Machine
Status . . . use
Network Mailbox
mailbox number
With some VoIP providers, the phone number has already been
downloaded together with the general VoIP provider data and
saved to the base station.
Save
Availability and operation of the functions
may differ on your telephone.
OK
Network Mailbox
OK . . . then
Save
to select On or Off
. . . use
to enter or amend the network
OK
. . .
Advertisement
Table of Contents
