Table of Contents
Advertisement
Switching the silent alert on/off
Incoming calls and other messages are indicated by a silent alert.
. . . use
Change (
= on)
Switching advisory tones on/off
The handset notifies acoustically about different activities and statuses. These advisory tones
can be switched on/off independently of each other.
. . . use
Tone when keys are pressed:
Confirmation/error tone after making entries, advisory tone when a new message has been
received:
Warning tone when there are fewer than 10 minutes of talktime remaining
(every 60 seconds):
Warning tone when the handset is moved out of range of the base station:
Save settings:
Auto answer
When Auto answer is enabled, the handset accepts an incoming call as soon as it is removed
from the charging cradle.
. . . use
Change (
= activated)
Regardless of the Auto Answer setting, the connection ends as soon as you place the handset
back in the charging cradle. Exception: Press and hold the handsfree key
2 seconds while placing the handset in the charging cradle.
Activating/deactivating visual call signal
Visual indication of incoming calls via the spot LED (e.g. in noisy environments).
. . . use
Signal
Change (
Changes are only saved permanently in Profile Personal.
to select
Audio Settings
to select
Audio Settings
Key Tones: . . . use
Confirmation
Battery
Out of Range: . . . use
Save
to select
Settings
to select
Settings
= on)
Availability and operation of the functions
may differ on your telephone.
OK
Silent Alert
OK
Advisory Tones
to select On or Off
. . . use
to select On or Off
. . . use
to select On or Off
to select On or Off
OK
Telephony
OK
Telephony
Setting the handset
OK . . . then
OK
Auto Answer
for a further
OK
LED Call
51
Advertisement
Table of Contents
