Baby Monitor - Panasonic KX-TGD310BX Operating Instructions Manual

call block list, the unit emits no sound to the
caller, and disconnects the call.
Important:
R Blocked calls are logged in the caller list.
Storing unwanted callers
Storing a single phone number
Important:
R You must include the area code when
storing phone numbers in the call block list.
n From the caller list:
1
M N
2
MbN: Select the entry to be blocked. a
M N
3
MbN: "Save Call Block" a MOKN
4
MbN: "Yes" a MOKN a M
n By entering phone numbers:
1
M N#217
2
MbN: "Single Number" a MOKN
3
M N a MbN: "Add" a MOKN
4
Enter the phone number (24 digits max.).
R To erase a digit, press MCN.
5
MOKN a M N
Storing a range of numbers
1
M N#217
2
MbN: "Range of Numbers" a MOKN
3
M N a MbN: "Add" a MOKN
4
Enter the desired number (2-8 digits).
R To erase a digit, press MCN.
5
MOKN a M N
Blocking incoming calls that
have no phone number
You can block calls when no phone number is
provided, such as private callers.
1
M N#240
2
MbN: Select the desired setting. a MOKN
3
M N
Viewing/editing/erasing call
block numbers
1
M N#217
2
MbN: "Single Number" or "Range of
Numbers" a MOKN
3
MbN: Select the desired entry.
R To exit, press M
4
To edit a number:
M N a Edit the number. a MOKN a
M N
To erase a number:
M N a MbN: "Yes" a MOKN a M
Note:
R When editing, press the desired dial key to
add digits and press MCN to erase digits.
N
Erasing all call block numbers
1
M N#217
2
MbN: "Single Number" or "Range of
Numbers" a MOKN
3
M N a MbN: "Erase All" a MOKN
4
MbN: "Yes" a MOKN
5
MbN: "Yes" a MOKN a M

Baby monitor

This feature allows you to listen in on a room
where another handset is located, allowing
you to easily monitor from different areas of
the house or place. The monitored handset
(placed in a baby's room, for example) will
automatically call the monitoring handset or
the phone number stored when it detects
sound.
Important:
R You should perform a test run of the baby
monitor procedure to ensure that the baby
monitor feature is set correctly. For
example, test its sensitivity. Check the
connection if you are diverting the baby
monitor to an outside line.
Programming
N.
N
N
29