Connecting With A Euro Scart Cable - LG 32LF7700 Owner's Manual

EXtERnAl EQuIPmEnt SEtuP

Connecting with a Euro Scart Cable

➊ Connect the Euro scart socket of the DVD to the
TV.
➋ Turn on the DVD player, insert a DVD.
AV1
➌ Select
If connected to
➍ Refer to the DVD player's manual for operating instructions.
NOTE
Any Euro scart cable used must be signal shielded.
►
Scart Output
Main Input
Freesat (Freesat)
Non-Freesat (
Digital Antenna (
Analogue Antenna (
AV1(SCART1)
AV2(SCART2)
Component
AV3(CVBS Side)
HDMI3(Side)
Connecting with an hdmI Cable
➊ Connect the HDMI output of the DVD to the
HDMI IN 3
HDMI
➋ Select
the remote control.
➌ Refer to the DVD player's manual for operating instructions.
NOTE
The TV can receive video and audio signals simultaneously when using a
►
HDMI cable.
If the DVD does not support Auto HDMI, you must set the output resolution
►
appropriately.
Check that your HDMI cable is version 1.3 or higher. If the HDMI cables don't
►
support HDMI version 1.3, flickering or no screen display can result. Please
use the latest cables that support at least HDMI version 1.3.
GB-6
INPUT
input source using the
AV2
Euro scart socket, select
DTV)
DTV)
TV)
RGB
HDMI
HDMI2
jack on the TV.
HDMI2 HDMI3
, or input source using the
AV1
Euro scart socket on the
button on the remote control.
AV2
input source.
AV1 (SCART1 Output)
Mute
Mute
Mute
Mute
(Analogue Antenna ( TV) if
the TV mode you last watched
is Analogue Antenna mode.)
HDMI/DVI IN 1, HDMI IN 2
INPUT
button on
➊
AV2 (SCART2 Output)
Freesat (Freesat)
Non-Freesat (
Digital Antenna (
Analogue Antenna (
AV1
AV2
Mute
Mute
AV3
Mute
Mute
Mute
or
➊
DTV)
DTV)
TV)