EXtERnAl EQuIPmEnt SEtuP
Connecting with a Euro Scart Cable
➊
Connect the Euro scart socket of the DVD to the
TV.
3
➋
Turn on the DVD player, insert a DVD.
2
1(DVI)
AV1
➌
Select
If connected to
➍
Refer to the DVD player's manual for operating instructions.
NOTE
►
Any Euro scart cable used must be signal shielded.
►
Copy-protected programmes will not be output on the EURO scart sockets for
legal reasons. Even if it was output, the video signals fed through the EURO
scart sockets will be not recorded by copyright protection systems.
Scart Output
Main Input
3
Digital TV
2
Analogue TV
1(DVI)
AV1 (SCART1)
AV2 (SCART2)
Component
AV3(CVBS)
HDMI4 (Only 32/42LF73**)
Connecting the HdmI Cable
➊
Connect the HDMI output of the DVD to the
HDMI IN 3
HDMI
➋
Select
using the
➌
Refer to the DVD player's manual for operating instructions.
NOTE
►
The TV can receive video and audio signals simultaneously when using a
HDMI cable.
►
If the DVD does not support Auto HDMI, you must set the output resolution
appropriately.
►
Check that your HDMI cable is version 1.3 or higher. If the HDMI cables don't
support HDMI version 1.3, flickering or no screen display can result. Please
use the latest cables that support at least HDMI version 1.3.
GB-8
(RGB)
INPUT
input source using the
ANTENNA IN
AV2
Euro scart socket, select
(RGB)
CVBS
ANTENNA IN
RGB
CVBS
RGB
(Analogue TV if the TV mode you last
HDMI
HDMI2
HDMI3
HDMI IN 4
or
(Only 32/42LF73 ** ) jack on the TV.
HDMI2
HDMI3
HDMI4
,
,
or
INPUT
button on the remote control.
AV1
Euro scart socket on the
3
2
1(DVI)
button on the remote control.
AV2
input source.
AV1 (SCART1 Output)
Mute
Mute
watched is Analogue mode.)
HDMI/DVI IN 1, HDMI IN 2
(Only 32/42LF73 ** ) input source
(RGB)
➊
AUDIO/
VIDEO
AV2 (SCART2 Output)
Digital TV
Analogue TV
AV1 (CVBS)
AV2 (CVBS)
Mute
Mute
AV3 (CVBS)
Mute
Mute
Mute
Mute
3
,
2
1(DVI)
➊
ANTENNA IN
(R) AUDIO (L)
3
2
1(DVI)
(RGB)