External Equipment Setup; Hd Receiver Setup - LG 32LF7700 Owner's Manual

EXtERnAl EQuIPmEnt SEtuP

To avoid damaging any equipment, never plug in any power cord until you have finished connecting all equipment.
■
This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for 37LF77 ** model.
■
Image shown may differ from your TV.
■

hd RECEIVER SEtuP

■ This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive Digital
signals from a digital set-top box or other digital external device, refer to the diagram as shown below.
Connecting with a Component Cable
➊ Connect the video outputs (Y, P
COMPONENT IN VIDEO
➋ Connect the audio outputs of the digital set-top box to the
AUDIO
jacks on the TV.
➌ Turn on the digital set-top box. (Refer to the owner's manual for the digital set-top
box.)
Component
➍ Select
Signal
480i/576i
480p/576p
720p/1080i
1080p
, P ) of the digital set top box to the
B R
jacks on the TV.
INPUT
input source using the
Component
O
O
O
O
(50/60Hz only) (24Hz/30Hz/50Hz/60Hz)
COMPONENT IN
button on the remote control.
HDMI
X
O
O
O
➊ ➋
GB-3