Omron BP7350CAN Instruction Manual page 35

7. Error Messages and Troubleshooting
Display/
Problem
appears
flashes
flashes
flashes
appears
flashes
34
Possible Cause
The monitor cannot
connect to a smart
device or transmit data
correctly.
The monitor is waiting
for pairing with the smart
device.
The monitor is ready to
transfer your readings to
the smart device.
There are more than 48
readings in memory to
be transferred.
The date and time is not
set.
There are 60 readings in
memory to be
transferred.
Batteries are low.
Solution
Follow the instructions
shown in the "OMRON
connect US/CAN" app. If
the "Err" symbol still
appears after checking
the app, contact customer
service. Refer to
section 12.
Refer to sub-section 4.1
for pairing your monitor
with your smart device, or
press the [START/STOP]
button to cancel pairing
and turn your monitor off.
Open the "OMRON
connect US/CAN" app to
transfer your readings.
Pair or transfer your
readings to the "OMRON
connect US/CAN" app so
you can keep them in
memory in the app, and
this error symbol
disappears.
Replacing all 4 batteries
with new ones is
recommended. Refer to
sub-section 2.1.