Technical Data; Environment Concerns; Installation - Zanussi ZSF2430 User Manual

Technical data

Dimensions
Electrical connection - Voltage
- Overall power - Fuse
Water supply pressure
Capacity

Environment concerns

The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed
information about recycling of this product, please contact
your local council, your household waste disposal service
or the shop where you purchased the product.
The packaging materials are environmentally friendly and
can be recycled. The plastic components are identified by

Installation

Warning! Make sure that mains plug is
disconnected from the mains socket during
installation.
Fitting the appliance
Put the appliance adjacent to a water tap and a drain.
When you put the appliance in place, make sure that the
water hoses are not kinked or squashed.
Install the appliance on a kitchen sink, worktop or built-
in..
Width cm
Height cm
Depth cm
Information on the electrical connection is given on the rating plate on the back of
appliance.
Minimum
Maximum
Place settings
markings, e.g. >PE<, >PS<, etc. Discard the packaging
materials in the applicable container at the community
waste disposal facilities.
Warning! To discard the appliance, follow the
procedure:
• Pull the mains plug out of the socket.
• Cut off the mains cable and mains plug and discard
them.
• Discard the door catch. This prevents the children to
close themselves inside the appliance and endanger
their lives.
Positioning
min. 450+5
min. 500
min. 550
54,5
44,7
48,0-49,0
0,8 bar (0,08 MPa)
10 bar (1,0 MPa)
Install the dishwasher in-
to the furniture of the
kitchen.
Make sure that the di-
mensions of the recess
agree with the given di-
mensions.
Make sure that there are
openings in the furniture
for the inlet hose, the wa-
ter drain hose and the
mains cable.
6
13