Operating Your Wine & Beverage Cooler - Vinotemp VT-OUTDR15GD Owner's Manual

INSTALLING THE STAINLESS STEEL HANDLE
This wine cooler includes a stainless steel handle that is not required to operate this unit. To install
the handle please follow the below instructions:
① Pull away the door gasket in the area where the handle is to
be installed. You can see two designated holes for handle
installation. The gasket is easily displaced by hand, no tools
② Install the handle tightly as shown below with the two
are necessary.
screws, lock washers and flat washers provided. (DO NOT
over tighten as this will cause damage to the handle assembly
③ Replace the door gasket to its original position.
and stainless steel surface of the glass door).
INSTALLING THE CHARCOAL FILTER
To install the charcoal filter, please follow the below instructions:
Place the carbon filter on top the wooden shelf.

The back of the filter has a 3M glue tape which you can

affix to the shelf or the inside of the unit.
OPERATING YOUR WINE & BEVERAGE COOLER OPERATING YOUR WINE COOLER
10