System Requirements - Belkin F9K1117V2 User Manual

allowing increased bandwidth to all your connected wireless devices and
computers.
NAT IP Address Sharing
To save you the cost of adding IP addresses per computer in your house,
your Belkin Router uses Network Address Translation (NAT) technology,
allowing you to share a single IP address across your network.
SPI Firewall
Your Router is equipped with a firewall that will protect your network
from a wide array of common attacks and viruses.
Universal Plug-and-Play (UPnP) Compatibility
The UPnP (Universal Plug-and-Play) feature in your Router offers
seamless operation of voice and video messaging, games, and other
applications that are UPnP-compliant.
Web-Based Advanced User Interface
You can easily make changes to your Router's advanced settings through
your web browser. These changes can be made from any computer on your
network.
Belkin Router Monitor
The Belkin Router Monitor application helps you to monitor your
'
Router s status and change network settings.
Integrated 4-Port Gigabit Switch
Your Router has a built-in, 4-port network switch to allow your wired
computers to share: printers, data, MP3 files, digital photos, and much
more.
2 USB 2.0 Ports
The USB ports let you plug in printers, hard drives, and other USB
devices to share across your network.

System Requirements

Router
Broadband Ethernet Internet connection with RJ45
At least one computer with:
Installed network interface card and TCP/IP networking protocol
RJ45 Ethernet networking cable
Internet browser
Setup Software
A computer running Windows® XP SP3 or higher, Windows
Vista®, or Windows 7; or Mac OS® X v10.5 or above
Minimum 1GHz processor and 512M BRAM
600MB of free hard-drive space for installation
Memory Safe and USB Print and Storage Manager
Windows XP SP3 or higher, Windows Vista, or Windows 7; or Mac OS X
v10.5 or above only